Trimming - Canon PowerShot SD4500 IS Digital ELPH User Manual

You can cut out a portion of a recorded image and save it as a new image file.
Trimming Area
Trimming Area Display
Recorded pixets after
trimming
choose [Trimming].
Press the
MENU
button to choose
[Trimming] in the FCl tab, then press the @
button.
choosean mage.
Press the _ _ buttons or turn the _::i_ dia! to
choose an image, then press the_-
button.
.... Adjust the trimming area.
A frame will appear around the portion of
the image to be trimmed.
The original image will display in the upper
left and the trimmed image wil! display in
the lower right.
if you move the zoom lever to the left or
right, you can change the frame size.
if you press the Av 4 _ buttons, you can
move the frame.
if you press the _ button, you can change
the frame orientation.
In an image with detected faces, gray
frames appear around the faces located in
the upper left image. The frames can be
used for trimming. You can switch between
frames by turning the _i::i:i_ dia!.
Press the M EN U button.
Save as a new image and display.
Follow Steps 4 and 5 on p. 127.
128