Canon ELURA 2 MC Instruction Manual page 90

'13
tu
4_
5.
6.
Press AUDIO DUB.
• AUDIO DUB. and @ll appear on the display.
Press the PAUSE button (and start play on the other audio device
if AUDIO IN).
, Audio dubbing starts.
, If MIC. IN, direct your vmce into the microphone.
, @11 changes to @.
When you get to tile point where you want to stop dubbing, press
the STOP button (and then stop play on the other audio device if
AUDIO IN).
, Audio dubbing stops and AUDIO DUB. disappears from the display.
, The camera returns to stop mode.
• You can also set zero set memory (1_ 79) at the place you want to stop
audio dubbing, then eve W time you return to that position, audio dubbing
will cancel.
° If instead of pressing STOP you press PAUSE, the camera will return to the
playback pause mode.
[]
, You can not use the DV terminal while adding sound.
• You might want to adjust the audio mix (_i91) when playing back a tape with
added sound.
• There may be a loss of sound quality if you add sound to a tape recorded on a
camcorder other than the ELURA2!ELURA2 MC.
• After adding sound 3 or more thnes to the same place on a tape, there may be
some loss in sound quality.
90