Canon ELURA 2 MC Instruction Manual page 127

[] The PHOTO button doesn't work.
[] Tile hnage cannot be erased.
• The MultiMediaCard is not loaded
( _ 94).
• The MultiMediaCard is full. Erase
images (12_ 104) or insert a new
MultiMediaCard.
, You have reached the maximum file
number Set the file numbering to
RESET through the menu ([222196)
and insert a new- MultiMediaCard.
, You are using an unformatted
MultiMediaCard. Format the card
(_I3 ll2).
, The image is protected ( _71103).
Problem
[] Tile wireless controller doesn't
work.
[] Tile power indicator is flashing.
[] The camera malfunctions.
[] The DV cable is connected
correctly, but there's nothing in
the display.
[] The camera becomes warm
during use.
Cause and/or what to do about it
, The remote sensor mode is set to
OFF((_ in the menu ([212143).
, The remote sensor modes of the
wireless controller and the camera
itself are different ( _ 43).
, The batteries are dead or not inserted.
o
®
Check the screen displays (_ 132).
External interference may cause the
camera's microprocessor to
malfunction temporarily. If random
letters appear in the display or if
normal operation is interrupted,
remove and then replace the power
source.
, Remove the cable and then reconnect
it or turn the power off and back on
again.
• This is not a malfunction.
127