Custom Function Settings*
2:1/200
sec. (fixed]
The flash-sync
speed
is fixed to 1/200 sec. This more effectively
prevents
subject
blur and camera
shake than with setting
1. However,
the background
may come out darker than with setting
1.
I_
When ior
2 is Set high'SPeed
sync Cannot be Used with an external
!
Speed!ite:
C,Fn I1: image
0: Off
1: Auto
For 1 sec. or longer
exposures,
noise reduction
is performed
automatically
if noise typical
of long exposures
is detected.
This [Auto]
setting
is effective
in most cases.
2: On
Noise reduction
is performed
for all exposures
of 1 sec. or longer. The
[On] setting
may be effective
for noise that cannot be detected
or
reduced
with the [Auto]
setting.
_[_
With settings
1 and 2. after the picture is taken, the noise reduction
process may take the same amount of time as the exposure. You cannot
take another picture until the noise reduction process is completed.
At ISO 1600 and higher, noise might be more pronounced
with setting 2
than with setting 0 or 1.
"With setting 1 or 2, if a long exposure
is shot with the Live View image
displayed. "BUSY" will be displayed during the noise reduction
process.
The Live View display will not appear until the noise reduction
is
completed.
(You cannot take another picture. J
253