Table of Contents
Advertisement
Preparing to Print
_
PictBridge
_i_
layback
the image.
® Press the <[_]>
button.
_y,, T he image will appear, and the <_'>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
U
Movies cannot be printed.
The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct
Do not use any interface cable other than the one provided.
If there is a long beeping sound in step 5, it indicates
a problem with the
_rinter. Resolve the problem displayed
by the error message
(p.244_
You can also print RAW images taken with this camera
If you use a battery pack to power the camera, make sure it is fully
charged. With a fully-charged
battery, printing up to about 4 hours is
possible.
Before disconnecting
the cable, first turn off the camera and printer. Hold
the plug (not the cord) to pull out the cable.
For direct printing, using AC Adapter Kit ACK-E8 (sold separately)
to
power the camera is recommended.
237
Advertisement
Table of Contents
