Broan RANGEMASTER 61000 Series Installation Instructions Manual page 6

INSTALL THE HOOD
1. Hang the hood from the brackets through
the rectangular cut-outs on the back of
the hood. Cut-outs are larger than the
brackets to allow for horizontal adjustment.
The bottom of the hood should be 24" to
30" above the cooking surface.
2. Height adjustment screws provide vertical
adjustment.
3. Depth adjustment screws provide hori-
zontal adjustment.
4. Secure the hood with mounting screws
(4,Sx38mm). Use drywall anchors,
provided, if wall studs or framing are not
available.
5. Remove the tape located on the damper.
MOUNTING SCREWS RECTANGULAR]
CUTOUTS I
(4,8x38mm)
...._L_ ....
MOUNTING
SCREWS
(4,8×38mm)
WALL FRAMING
DEPTH ADJUSTMENT
SCREWS
\
MOUNTING
SCREWS
(4,8x38mm)
HEIGHT ADJUSTMENT
SCREWS
REMOVE THE TAPE
HOOD DmSTANCEABOVE 36" HIGH COOK TOP
8' Ceiling 9' Ceiling 10' Ceiling
Standard Flues Minus 24 - 29 _A 25 - plus 30"
-6-