Choosing A Fill Pattern - Pulse BES Embroidery Software 2 Instruction Manual

Choosing a Fill Pattern

When you install Pacesetter BES Lettering 2, a wide variety of
Standard and Carved patterns are installed along with the
software. You can select which Standard or Carved pattern to
use in the Properties box.
To choose the fill pattern:
1 Select the Lettering segment.
2 In the Fill area of the Properties box, in the field labelled Fill
Type, select either Standard or Carved.
3 Click on the down arrow on the right of the Pattern field to
display a drop-down list of patterns.
You see a list of patterns; the patterns that are displayed
depend on the type of fill you chose in step 2.
Text Properties 79