3 Select the machine format from the Format drop-down list.
If you choose the PES format, you will see that there is an
option to select "MultiNeedle" hoops. This applies only if you
have a MultiNeedle embroidery machine.
If you check this box, the list of hoop formats will change to a
list of hoops that are used with a MultiNeedle machine.
4 From the list of Hoops, choose a hoop size appropriate for
your design.
5 If needed, check the "Rotate 90" box to make the hoop fit
your design better.
6 Click OK.
Creating a Custom Hoop
You can also create your own custom-sized hoops using the
Hoops dialog. Once you have set the parameters for your hoop
and typed in a description, the custom hoop will be saved by the
Hoops dialog; it will be available for your use in future designs.
To add a custom hoop:
1 On the Home Tab click the down arrow under the Hoop tool.
2 From the menu that appears, click on Select Hoop.
You see the Hoops dialog.
3 Click the New button.
You see the New Hoop dialog.
Learning about the Workspace 29