Adjusting The View Of The Workspace; Magnifying And Reducing The View; Instruction Manual - Pulse BES Embroidery Software 2 Instruction Manual

24 Pacesetter BES Lettering 2

Instruction Manual

To change machine format properties:
1 On the View tab of the Ribbon, select the Preferences
button.
You see the Program Preferences dialog box.
2 Click the Formats tab.
3 From the Machine format list, select the machine format that
you want applied to new design files.
4 Click OK.
Adjusting the View of the
Workspace

Magnifying and Reducing the View

se Zoom to magnify or reduce parts of your design. With
U
Zoom you can either left-click to enlarge your design or right-
click to make your design smaller.
When you select Zoom, the cursor changes to a small magnify-
ing glass . To use the Zoom tool, do one of the following:
• To zoom in on the spot where the mouse is currently
pointing, left-click.
• To zoom out again, right-click.
• To zoom in on a particular area, left-click and drag; the
display will expand to show only the area that you have
dragged over.
To use the Zoom Tool:
1 On the Ribbon, select the Home tab.
2 In the Zoom toolbar, click on the Zoom
The pointer becomes a magnifying glass.
3 Do either of the following:
 Left-click to make your design larger.
 Right-click that area to make your design smaller.
tool.