Start Of Batch Scan; Close Of Batch Scan - Konica Minolta ScanDIVA User Manual

3

Start of Batch Scan

1. The "Scan" button is pressed after "Scan Mode" is set, and the original is read.
NOTE !
2. Sets the "Image Mode", "Image Adjustment", "File Format", and ""Cropping
Area".
3. When "Start" button is pressed, the image displayed in the "Preview Window" is
saved. Also, Batch Scan begins and the "Start "button changes to "Done".
4. When the "Scan" button is pressed when Batch Scan mode is active, the
Image file is saved.
NOTE !

Close of Batch Scan

If the "Done" button is pressed the Batch Scan session is ended and the button
changes to "Start". In addition, the "Scan Mode", "Image Mode", "Image Adjustment",
and "File Format", and "Clear" buttons become active.
3-12
The image in the Preview Window is not saved until the "Start" button
is pressed.
When in Batch Scan mode, the "Scan Mode", "Image Mode", "Image
Adjustment", "File Format", and "Clear" buttons are not active.
Operation of Application
ImageDIVA Touch