Connecting Example: Hdmi In/Computer In; 3D Ir Transmitter (Optional Accessory) Connection - Panasonic PT-AE7000U Operating Instructions Manual

Connecting example: HDMI IN/COMPUTER IN

HDMI cable
(commercially available)
To HDMI output
Blu-ray player
Note
Use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not meet HDMI standards is used,
z
video may be interrupted or may not be displayed.
It is possible to connect with DVI devices via an HDMI/DVI conversion adapter, but some devices may not project the
z
image properly or other such problems could be encountered.
When connecting to a serial terminal, see "Serial terminal". (
z
If you use a computer that has a resume function (last memory), you may have to reset the function so that it operates.
z

3D IR Transmitter (optional accessory) connection

Attention
Check that the main power of the projector is switched off before inserting or disconnecting a cable to <TRIGGER/3D
z
SHUTTER OUT>.
Note
When an ET-TRM110 external 3D IR Transmitter (optional accessory) is connected to view a 3D movie, it is necessary to
z
configure [3D SHUTTER OUT] of the relevant [TRIGGER 1/2 SETTING] on the device it is connected to. (

page 97)
3D IR Transmitter
Connections
Computer cable
(commercially available)
To RGB output
Computer
IR cable
(included with 3D IR Transmitter)
ENGLISH - 27

page 75)