Connections; Before Connecting To The Projector; Connecting Example: Component In/S-Video In/ Video In; Connecting Example: Hdmi In/Computer In - Panasonic PT-AE3000U Operating Instructions Manual

Connections

Before connecting to the projector

Read and follow the operating and connecting instructions of each peripheral device.
The peripheral devices must be turned off.
Use cables that match each peripheral device to be connected.
Confirm the type of video signals. See "List of compatible signals" on page 50.
Audio cables must be connected from each peripheral device directly to the audio reproduction system.
Connecting example: COMPONENT IN/S-VIDEO IN/
VIDEO IN
\
To COMPONENT
video output
DVD player

Connecting example: HDMI IN/COMPUTER IN

HDMI cable
(RP-CDHG100: Optional))
NOTE:
• Make sure the HDMI cable is adapted to your HDMI device for proper performance.
• A compatible cable is required for an HDMI 1 080p signal.
• It is possible to connect with DVI devices via a HDMI/DVI conversion adapter, but some equipment may not project the
image properly or other problems could be encountered. See "Serial terminal" on page 51.
E
18 - NGLISH
To VIDEO output
To HDMI output
DVD player
Video player
Computer
To S-VIDEO output
DVD player
RGB signal cable
(Commercial item)