Other Features - Panasonic PT-AE7000U Brochure

Other Features

• 16-bit (full 12-bit) gamma correction for nat-
ural gradations.
•
3D noise reduction for high-precision noise
detection and reduction.
• Scene-adaptive MPEG noise reduction effec-
tively blocks regular noise and minimizes
mosquito noise.
• Scene adaptive resizing LSI improves quality
when resizing 480p images or those from
other sources with resolution lower than the
PT-AE7000's native resolution.
• 24p compatible.
• Progressive cinema scan (3/2 pulldown) and
HD IP.
• Auto 3D input format select for frame pack-
Optional accessories
ET-PKA110S
Ceiling mount
bracket for low
ceilings
ET-PKA110H
Ceiling mount
ET-LAA310
bracket for high
Replacement
ceilings
lamp unit
NOTE: The 3D Eyewear models shown above are current models as of September 2011.
For information on other available models with verified interoperability and the
newest models, please visit our Projector Global Web Site.
htt p: / / pa na so n i c . ne t/ a vc/ p rojecto r
Projection distance
Aspect ratio 16:9
Projection size (16:9)
Diagonal length
1.02 m / 40˝
1.52 m / 60˝
2.03 m / 80˝
2.54 m / 100˝
3.05 m / 120˝
3.81 m / 150˝
5.08 m / 200˝
6.35 m / 250˝
7.62 m / 300˝
Aspect ratio 2.35:1
(When projecting both 2.35:1 and 16:9 images onto a 2.35:1 screen using the Lens Memory function.)
Projection size (16:9)
Diagonal length
1.02 m / 40˝
1.52 m / 60˝
2.03 m / 80˝
2.54 m / 100˝
3.05 m / 120˝
3.81 m / 150˝
5.08 m / 200˝
6.35 m / 250˝
7.62 m / 300˝
* 1 If you do not have a Panasonic 3D TV that supports 3D video, use a SANYO eneloop Mobile Booster KBC-L2 series to charge your Eyewear. The code that follows KBC-L2 may differ depending on
the country of purchase. The code at the end of the model number of 3D Eyewear may differ depending on the country of purchase. * 2 The projector uses a type of liquid crystal panel that typically
consists of millions of pixels. This panel is built with very high-precision technology to provide the finest possible image. Occasionally, a few pixels may remain turned on (bright) or turned off (dark).
Please note that this is an intrinsic characteristic of the manufacturing technology that affects all products using LCD technology. * 3 The projector uses a high-voltage mercury lamp that contains
high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. The length of time that it takes for the lamp to break or fail to illuminate varies
greatly depending on individual lamp characteristics and usage conditions. * 4 The values above are maximum values when they are used in cycles of being turned on for 2 hours and off for 0.25 hours.
When the lamps are turned on and off more frequently, the lamp replacement cycle is shortened. The usage environment affects the lamp replacement cycle. * 5 Measurement, measuring conditions,
and method of notation all comply with ISO 21118 international standards. * 6 In dynamic mode, with dynamic iris on. * 7 In cinema 1 mode, with dynamic iris on. * 8 Shift range is limited during simul-
taneous horizontal and vertical shifting. * 9 When a 3D signal is being input or when a 2D signal is converted to 3D, the keystone correction does not function. * 10 Effective in Rec. 709 picture mode.
* 11 CEC is an abbreviation for Consumer Electronics Control. Operation may not be possible with some connected equipment or settings. * 12 With legs at shortest position. * 13 Average value. May
differ depending on models. * 14 When [HIGH ALTITUDE MODE] is set to [ON]: 0°C – 35°C (32°F – 95°F)
For more information about Panasonic projectors
http://panasonic.net/avc/projector
Panasonic projectors facebook page
http://www.facebook.com/panasonicprojector
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. Product availability
differs depending on region and country. This product may be subject to export control regulations. The projection distances and throw
ratios given in this brochure are for use only as guidelines. For more detailed information, please consult the dealer from whom you are
purchasing the product. The PJLink trademark is an application trademark in Japan, the United States, and other countries and regions
or registered trademarks. All other trademarks are the property of their respective trademark owners. Projection images simulated.
© 2011 Panasonic Corporation. All rights reserved.
ing, side by side, and top and bottom. Man-
ual selection is also possible.
• Selectable frame response.
• Independent horizontal/vertical sharpness
adjustment.
• Featuring a wide range of aspect modes,
including ones for anamorphic lenses.
(JUST/4:3/16:9/S16:9/14:9/ZOOM1/ZOOM2/
H-FIT/V-FIT) NOTE: The selectable modes
vary depending on the input signal.
• Up to sixteen sets of PICTURE adjustment
settings can be stored in memory with cus-
tom names that make them easy to remem-
ber (PICTURE MEMORY).
• Masking function to match the desired pro-
jection area to the screen.
ET-TRM110
3D IR
transmitter
TY-EW3D3L
3D Eyewear
(large size)
TY-EW3D3M
3D Eyewear
(medium size)
TY-EW3D3S
3D Eyewear
(small size)
Projection distance
Min (Wide) Max (Telephoto)
1.16 m / 3´10˝ 2.37 m / 7´9˝
1.77 m / 5´10˝ 3.58 m / 11´9˝
2.37 m / 7´9˝ 4.79 m / 15´9˝
2.98 m / 9´9˝ 6.00 m / 19´8˝
3.58 m / 11´9˝ 7.20 m / 23´7˝
4.49 m / 14´9˝ 9.02 m / 29´7˝
6.00 m / 19´8˝ 12.04 m / 39´6˝
7.51 m / 24´8˝ 15.06 m / 49´5˝
9.02 m / 29´7˝ 18.08 m / 59´4˝
Projection distance
Min (Wide) Max (Telephoto)
– / – – /
1.40 m / 4´7˝ 2.85 m / 9´4˝
1.88 m / 6´2˝ 3.82 m / 12´6˝
2.37 m / 7´9˝ 4.78 m / 15´8˝
2.85 m / 9´4˝ 5.74 m / 18´10˝
3.57 m / 11´9˝ 7.19 m / 23´7˝
4.78 m / 15´8˝ 9.60 m / 31´6˝
5.98 m / 19´7˝ 12.02 m / 39´5˝
7.19 m / 23´7˝ 14.43 m / 47´4˝
Specifications
Power supply
Power consumption
LCD* 2 panel Panel size
Display method
Drive method
Pixels
* 1
Lamp* 3
* 1
Lens
Projection size (diagonal)
* 1
Brightness* 5
Center-to-corner uniformity ratio*
Contrast ratio* 5
Resolution
Scanning frequency
RGB
YP P (YC C )
B R B R
Video/S-Video
Optical axis shift* 8
Keystone correction range
Terminals
HDMI IN
COMPUTER (RGB) IN
COMPONENT IN
TRIGGER IN / TRIGGER OUT /
3D SHUTTER OUT
VIDEO IN
S-VIDEO IN
SERIAL IN
Dimensions (W × H × D)
–
Weight* 13
Operation noise* 5
Operating temperature
Operating humidly
Supplied accessories
NOTE: A PC is required to read the detailed operating instructions (a PDF file on a CD).
All information included here is valid as of September 2011.
• User-friendly ergonomic remote
control.
• Built-in test pattern including
color bar and gray scale.
• On-screen input guidance.
• Auto input search.
• Quiet operation: 22 dB (lamp
power: ECO).
• NORMAL/ECO lamp power selection.
Each Panasonic projector is produced by a ver-
tically integrated production process, which
extends from R&D to manufacturing, at the
Panasonic factory in Japan, under strict quality
control. This ensures stable, top-quality perfor-
mance in every product.
100–240 V AC, 50/60 Hz
285 W (0.08 W in standby mode)
18.7 mm (0.74 in) diagonal (16:9 aspect ratio)
Transparent LCD panel (× 3, R/G/B)
Active matrix
2,073,600 (1,920 × 1,080) × 3, total of 6,220,800 pixels
200 W UHM lamp (The lamp replacement cycle is up to 4,000
hours (lamp power: NORMAL) / 5,000 hours (lamp power:
ECO)* 4 )
Powered zoom/focus lenses (1.35–2.70:1),
F 1.9–3.2, f 22.4–44.8 mm
2D projection: 1.02–7.62 m (40–300 inches)
3D projection: 1.02–5.08 m (40–200 inches)
2,000 lm* 6
5 85%
300,000:1* 7 (full on/full off)
1,920 × 1,080 pixels
f : 15 kHz–74 kHz, f : 24 Hz–85 Hz,
H V
dot clock: 154 MHz or lower
525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i,
1125 (1080)/24p, 1125 (1080)/60p, 1125 (1080)/50p
f : 15.75 kHz, f : 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
H V
f : 15.63 kHz, f : 50 Hz [PAL/PAL-N/SECAM]
H V
Vertical: ±100%, horizontal: ±26%
Vertical: approx. ±30° * 9
HDMI connector × 3, HDMI (Deep Color, x.v.Color, *
HDCP compliant, supports HDAVI Control Version 5
D-sub HD 15-pin (female) × 1 (RGB/YP
B
RCA pin × 3 (YP P /YC C )
B R B R
M3 × 2, 12 V, max. 100 mA (input/output/3D shutter output
selectable using on-screen menu)
RCA pin × 1
Mini DIN 4-pin × 1
D-sub 9-pin × 1 for external control (RS-232C compliant)
470 mm × 151 mm × 364 mm* 12
(18-17/32˝ × 5-15/16˝ × 14-11/32˝)*
Approx. 8.7 kg (19.2 lbs)
22 dB (lamp power: ECO)
0°C–40°C (32°F–104°F)* 14
20%–80% (no condensation)
Power cord (× 1) (× 2 for PT-AE7000EA)
Wireless remote control unit (× 1)
Batteries for remote control (AA/R6 type × 2)
Lens cover (× 1)
JQA-QMA14392 EC98J2010
Factories of Business Solutions Business Group have received ISO
14001:2004—the Environmental Management System certification
(except for third parties' peripherals).
PT-AE7000G1 Printed in Japan.
10 CEC* 11 ),
P /YC C × 1)
R B R
12
051