Panasonic PT-AE7000U Brochure page 4

Comfortable 3D Viewing Experience
LCD Panels Driven at 480Hz and Original Overdrive
Technology for Clear 3D Image
The PT-AE7000 features 480Hz-driven LCD panels, which lengthen the
time that the shutter is open about 1.5 times the duration of a 240-Hz
drive system. Together with Panasonic's original high-precision over-
drive technology, this improves the brightness of the images viewed
through 3D Eyewear, while at the same time minimizing crosstalk, or
double image seen as a result of the left image entering the right eye
and vice versa.
240-Hz Drive System
projected image 3D Eyewear
L to R
R
approx.
4 ms
R to L
L
Customization and Installation Flexibility
Intelligent Lens Memory with
Auto Detection
Up to six settings can be stored in the
Lens Memory, including zoom and
focus positions for projecting in the
normal 16:9 or 4:3 image ratio, and
wide cinema projection settings.
These memories can be recalled
manually or can be set for automatic
switching. The projector is able to
detect 2.35:1 and 16:9 source and
retrieve the stored setting automati-
cally. This Lens Memory function lets
you easily enjoy images with different
image ratios on a wide 2.35:1 screen
for an immersive movie theater-like
experience.
2x Optical Power Zoom/Focus and Wide Lens Shift Range
A 2x optical power zoom/focus lens and a lens shift function together
make it possible to project a 120-inch picture from as close as 3.6
meters (11 feet 10 inches) to the screen or as far as 7.2 meters (23
feet 7 inches) away. In addition, the image can be shifted ±100% verti-
cally, and ±26% horizontally. This gives you outstanding setup flexibility.
If you choose to ceiling-mount the projector, you can zoom and focus
by remote control.
480-Hz Drive System
projected image 3D Eyewear
L to R
approx.
R
6 ms
R to L
L
2.35:1 projection image 2.35:1 projection image
16:9 projection area
Intelligent Lens Memory
The projector recalls
Blu-ray/DVD
the zoom and focus
contents
positions by detecting
the aspect ratio.
16:9 projection image
2.35:1 projection area
Newly Developed Dual Core Processing Engine
High-quality 2D image processing,
including Frame Creation and
Detail Clarity Processor, can now
be enjoyed in 3D as well, with the
incorporation of the newly devel-
oped dual core processing engine.
Frame Creation 2 for Motion Blur Reduction in 3D/2D Viewing
A double-speed frame interpolation display for 2D viewing, and also in
3D viewing, greatly improves the clarity of motion images, reproducing
sharp and clear images for fast moving scenes in sports and action
movies. For 24p signal input, four frames are calculated and interpo-
lated for each existing frame, to enable 5x speed (120-Hz) display.
Frame
Creation 2
Off
Waveform Monitor for
Precise Calibration
With the PT-AE7000 you
can view the waveforms
on the screen and adjust
the settings both auto-
matically and manually
as you prefer.
Advanced Gamma Adjustment Function
The gamma curve can be flexibly controlled, allowing precise calibra-
tion according to the signal source and environment. Brightness (Y), R,
G and B can each be adjusted at any nine points. Adjustment point
positions can be shifted both horizontally and vertically to bring out the
desired gradation level.
Split Adjust Mode for Easy Picture Adjustment
You can freeze any scene you wish, and then make adjustments while
easily comparing the original image and the adjusted image side by
side.
Cinema Color Management Premium Enables Flexible
Color Control
This color correction system enables free color control in two different
modes. The Point Color Correction mode lets you pick a point in the
image and adjust that color without affecting the neighboring colors.
The Six Color Correction mode enables independent adjustment of red,
green, blue, cyan, magenta and yellow.
High-speed and
high-precision
signal processing
produce
remarkable 3D
images.
Frame
Creation 2
On
Frame Creation 2:
Motion is crisp and
clear even for fast-
moving images and
panning scenes.