Table of Contents
Advertisement
ENLTV-DVB-S User's Guide -
Chapter 3: Launch the Software
3.1 Running the ENLTV-DVB-S for the first time.
Click "Start" on Windows Taskbar, and then select "All Programs" \ Encore \ ProgDVB
At the first time running, please follow the setup steps as below.
1. Select the type of your card and click
"Next" button.
2. You must add the switch and/or positioner
into the DiSEqC tree (Main Menu -> Setting
-> DiSEqC) and select your converter type (in
LNB properties). In the same place, you also
need to assign to each converter the satellite
(or several satellites) that will be received.
14
Advertisement
Table of Contents
