Table of Contents
Advertisement
ENUTV User's Guide
Chapter 3: Launch the ENUTV Program
3.1 - Running the ENUTV for the first time
NOTE:
When the ENUTV Program is first started, it will prompt you to configure the Device Setting.
Click "Start", move your mouse to
"Programs\ENUTV\ENUTV" then click
ENUTV
1.
Select the video signal format in your
area (NTSC or PAL) from the "TV Tuner
Standard" drop-down menu.
2.
Click "Next"
3.
This step will give you an option to scan
for TV channels. Select which signal
source you are connected to in the "TV
Scan Type" line then click "Search".
There are two types of scans.
i.
One is scan by TV channel table
"Cable", "Antenna" and "Extend"
ii.
One is scan by frequency that scans
low frequency to high frequency. The
"Auto" scan mode is not for the TV
table order.
20
Advertisement
Table of Contents
