How To Use This Guide; Service Bulletins - Samsung PCK6115R Service Manual

SAMSUNG PROJECTION TV SERVICE GUIDE

How to use this Guide

This guide is divided into seven sections. Start with the section marked
"Instructions".
The models covered in this document are derived from the P51A chassis. However; this
chassis has several different versions that are NOT covered in the service manuals.
Instructions to Start Service:
1. Obtain model, serial and symptom.
2. Review service bulletins (section 2), for common fixes. If Service Bulletin states that
repair is common, complete repair as indicated. Otherwise, proceed to section 3.
3. Review symptom/repair list as per the micro kit section (3). Order part number for
"kit" or individual parts.
Important Note:
not available as an additional 45 minutes to 1 hour is needed for convergence, alignments and
other configuration setup.
4. If the previous steps do lead to a clear diagnosis, then proceed to the flow chart in
section 3 to help assist you in determining the correct PCB's to order.
5. Place order through Samsung Parts Department.
Note: Distributors DO NOT carry PCB's or macro kits, so backorder with
no eta will result. Parts Department will not accept an order for PTV parts without a
serial number because correct ID cannot be assured.
6. Parts will automatically ship 2
returned A.S.A.P. Your account will be charged, depending on the kit, up to
$1500.00 if the kit is not returned within 30 days.
7. When installing parts (refer to section 6 - Assembly/Disassembly), repair alignment
or adjustment will be necessary. There are three adjustment modes:
Convergence – to enter, press "Mute 183"
Geometric; Color Temp, etc. – to enter, press "Mute 182"
Geometric 1080i mode (DTV ready sets only, PCJ534RF, PCJ532RF, PCK5315R,
PCJ614RF, PCJ611RF, PCK6115R, HCJ552W/HCJ652W) - Refer to Service Bulletin
Follow detailed Alignment/Adjustment instructions in the service manual or the macro kit
instruction sheets.
Last update: 3/14/01
Section 1 - How to Use This Guide
Order MACRO Kit only when technically required or the individual boards are
nd
day or faster. It is essential that the macro kit be
1