Plug-In Requirements - HP Designjet T1300 User Manual

AutoCAD 2007, 2008, 2009
User interface for these versions of AutoCAD is similar to the one for AutoCAD 2010:
Commands HPIPPRESET, HPIPPS and HPIPCONFIG are available.
●
Context menu entry when right-clicking is available.
●
Menu entry in Menu Bar > File is available.
●

Plug-in requirements

The plug-in prints from Paper Space only. Model Space printing is not supported, as the Autodesk
recommendation is to use the Paper Space instead. The Model Space does not support batch file
printing.
After a drawing is printed from the plug-in, the HP ePrint & Share Printing tool opens.
If you are not currently logged into HP ePrint & Share, a message box tells you that you are not
currently logged in, and asks you to log in and retry. A dialog box is also displayed, in which you can
log in.
12 Chapter 3 Print from AutoCAD ENWW