Using The Product; Handling Ink Cartridges - Epson Disc Producer PP-100 User Manual

❏ Place the product near a wall outlet where the plug can be easily unplugged.

Using the Product

Observe the following when using the product:
❏ Do not insert objects in the product.
❏ Take care not to spill liquid on the product.
❏ Do not use aerosol products that contain flammable gases inside or around this
product. Doing so may cause fire.
❏ Always turn the product off using the P power button. When this button is pressed, the
power light flashes. Do not unplug the product or turn off the power to the outlet
until the
❏ Leave the ink cartridges installed. Removing the cartridges can dry out the print head
and may prevent the product from printing.
❏ Be careful not to trap your fingers when closing the disc cover.
❏ The product uses galvanized sheet metal, and this may cause rusting at the edges;
however, this does not cause any harm to the function of the product.
❏ Do not place any drink or liquid on the product as penetration by liquid inside the
product will cause a malfunction.
❏ Do not open disc cover while running a job (busy indicator is flashing), unless the
application instructs to add or remove discs. This may affect write quality or print
quality. Also, for safety reasons, do not put your hands inside the product while
beeping, as arm is still moving.
❏ The product cannot be used as a shared printer using the Windows sharing setting.

Handling Ink Cartridges

Observe the following when handling the ink cartridges:
❏ Keep ink cartridges out of the reach of children. Do not allow children to drink from or
handle the cartridges.
❏ Do not shake ink cartridges; this can cause leakage.
power light stops flashing.
Important Notice and Safety Instructions
9