Writing Problem; Cannot Write To The Disc - Epson Disc Producer PP-100 User Manual

❏ If the arm is stopped while picking up disc, do not try removing disc by hand. This may result in
damaging the arm. If such an error occurs, turn off/on the power and try resolving the problem
by initializing the product. If the error continues to occur, contact customer support.
If your discs jam frequently, make sure of the following:
❏ The discs are smooth, not damaged.
❏ You are using high-quality discs.
❏ The printable sides of the discs are face up in the stacker.
❏ The stack of discs was fanned before loading.
❏ The stack of discs is not loaded above the red line in the stacker.
❏ The number of discs in the stacker does not exceed the limit specified for that disc.
& See "Mechanical" on page 122.
❏ The product is on a flat, stable surface that extends beyond the base in all directions.
The product will not operate properly if it is tilted.

Writing Problem

Cannot Write to the Disc

Avoid using the product where dust or smoke is abundant. It may result in write error.
If a disc write error occurs frequently, check the following:
❏ The disc is not damaged.
❏ The disc is high-quality.
❏ The product is used within acceptable environmental conditions.
❏ The product is not subject to vibration or shock.
❏ The fan filter is not clogged with dust.
❏ The printer tray is not dirty.
102
Troubleshooting