Overview Of Publishing Modes - Epson Disc Producer PP-100 User Manual

Overview of Publishing Modes

To write data to CDs/DVDs and to print labels that you created/edited are called "Publish"
in EPSON Total Disc Maker. The product has three kinds of publishing modes.
Standard Mode
This mode uses stacker 1 as the input stacker, and stacker 2 or 4 as the output stacker.
When stacker 2 is selected as the output stacker, up to 50 CDs/DVDs can be created at
once. Also, if you refill discs in the input stacker and take out published discs from the
output stacker at the same time, up to 1000 CDs/DVDs can be published in a single job.
If stacker 4 is selected as the output stacker, discs can be removed without stopping the
product while running a job.
Note:
This mode does not use stacker 3.
& See "Standard Mode" on page 30.
External Output Mode
This mode uses stacker 1 and 2 as the input stackers, and stacker 3 or 4 as the output
stacker.
Different types of discs (CD and DVD) can be loaded into each of the 2 stackers and can
create different types of discs. This is ideal for creating small batches of discs at once.
If the same type of discs are loaded into stacker 1 and 2 and Auto is selected for the input
stacker setting, up to 100 CDs/DVDs can be continuously published by taking out
published discs without refilling discs.
Up to 1000 CDs/DVDs can be continuously published in a single job by refilling discs and
taking out published discs.
If stacker 4 is selected as the output stacker, discs can be removed without stopping the
product while running a job.
Note:
This mode does not use stacker 3 if you select stacker 4 as the output stacker.
& See "External Output Mode" on page 42.
24
Publishing Discs