Panasonic VIERA TC-L32C3 Owner's Manual page 37

IJ)_T3161i11'F_ 161"1,-")J] [_,_'Z;_]
Photo: Still images recorded with digital still cameras compatible with JPEG files of DCF* and EXIF**
standards
Data format: Baseline JPEG (Sub-sampling: 4:4:4, 4:2:2 or 4:2:0)
Max. number of files: 9,999
image resolution: 160 x 120 to 20,000,000
* DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association's standard
** EXIF (Exchangeable Image File Format)
( Caution )
@ AJPEG image modified with a PC may not be displayed.
@ Partly degraded files might be displayed at a reduced resolution.
(N D
@ Folder structure viewed in PC
_DCIM
100_PANA-
Created automatically
3-digit folder number + 5-digit arbitrary characters
m000001.JpG_4-digit arbitrary characters + 4-digit file number
; P1000002.JPG|@
Usable characters: 1-byte "a to z", "Ato Z", "0 to 9," and ....
I P1000003.JPG
I P1000004.JPG _
@ The folder and file names may be different depending on the digital camera used.
@ For the suitable SD Memory Cards, please confirm the latest information on the following website.
http://panasonic.jp/support/globallcs (This site is in English only)
[_,_3"!IKIIII_ I _ illTil h'l_ili/IIi_] [.1J)[_,_;l't; _
@ Use an SD Card which meets SD standards. If not, it may cause the TV to malfunction.
@ Do not remove the card while the unit is accessing data (this can damage card or unit).
@ Do not touch the terminals on the back of the card.
@ Do not subject the card to high pressure or impact.
@ insert the card in the correct direction (otherwise, card or unit may be damaged).
@ Electrical interference, static electricity or erroneous operation may damage the data or card. E
@ Back up the recorded data at regular intervals in case of deteriorated or damaged data or
C
erratic operation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.)
24 mm
@
o
::3"-
'm
o
'm
6"
o
'm
kVi1:1 t,;_'lIK'i'l,_lEI-'IJT_'\vAI [_S11I_1 '''_
HDMI connections to some Panasonic equipment allows you to interface automatically. (p. 23)
@ This function may not work normally depending on the equipment condition.
@ The equipment can be operated by other remote controls with this function on even if TV is in Standby mode.
@ image or sound may not be available for the first few seconds when the playback starts.
@ image or sound may not be available for the first few seconds when Input mode is switched.
@ Volume function will be displayed when adjusting the volume of the equipment.
@ If you connect equipment that has "HDAVl Control 2 or later" function to the TV with HDMI cable, the sound from DIGITAL
AUDIO OUT terminal can be output as multi channel surround.
@ "HDAVl Control 5" is the newest standard (current as of December, 2010) for the HDAVl Control compatible equipment.
This standard is compatible with the conventional HDAVl equipment.
I
37
tc_L32_c3_eng_Oa91.indb 37 2011/01/05 11:11:4:
I