Craftsman 247.88782 Operator's Manual page 8

installing the Chute
1. Removethehex washerscrewsin the chute base.See Figure4.
HexWasher
Screw_,
/
/
.
Figure4
Align theholes in the chutebasewith the holesin the lowerchute
and securewith the previouslyremovedhex washerscrews.See
Figure5.
Installing the Chute Rotation Control Assembly
1. Removethe fourhex washerscrewsfrom the back of the handle
(twoon eachside). See Figure6.
Figure6
Usingthefour hexwasherscrews,install thechute rotation
controlassembly.See Figure7.
Figure5
Figure7
8