Connecting The Printer; Attaching The Printer's Strap And Button - Paxar HANDIPRINT 6017 Operating Instructions Manual

C o n n e c t i n g t h e P r i n t e r
Attach the handheld to the printer's 14-pin connector as
shown.
Cutout
Bottom Lip
The handheld's bottom lip fits snugly under the printer's
cutout.
If your handheld has a strap, you may
remove the strap or keep it attached
A t t a c h i n g t h e P r i n t e r ' s S t r a p a n d B u t t o n
The printer is shipped with the strap and mounting button
already attached. With the button attached to the printer,
you can order the optional belt clip (120296) and wear
the printer clipped to your belt.
To attach the elastic strap and button to the printer:
1. Remove the handheld. (This step is optional.)
2.
Turn over the printer.
to the handheld (allows for a more
secure fit) before inserting the
handheld into the printer.
14-Pin
Connector
Getting Started 1-7