Care And Cleaning Of The Cooktop; Sealed Burner Assemblies; Burner Caps And Heads - GE JGP989 Owner's Manual & Installation Instructions

Care and cleaning of the cooktop, ge.com
Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.
era I
@Burner cap
Q Burnerhead
ectrode
Burnerbase
/
_, CAUTION:Do not operate the
burner without all burner parts in
place.
Sealed Burner Assemblies
Turn all controls OFF befiwe removing
tile burner parts.
Tile burner grates, caps and burner
heads can be lifted off, making them
easy to clean.
\
_ Electrode
When one burner is turned to
LifE, all tile burnexs spark. Do not
attempt to disassemble or clean
around any burner while another
bm'ner is on. An electric shock
may result, which could cause you
to knock over hot cookware.
After cleaning make sure the
notch in the burner head is
positioned toward the electrode.
Rotate the burner head around the
burner base until it is level and
securely seated.
Burner Caps and Heads
NOTE: Beforeremoving the burner caps
and heads, remembertheir sizeand location.
Replacethem in the same location after
cleaning. Theburner heads and burner bases
are labeledA, Band C to aid reassemb/g
BurnerCaps
Lift off when cool. X.%shburner caps
in hot, soapy water and rinse with clean
water: You may scour with a plastic
scom'ing pad to remove bm'ned-on
food particles.
BurnerHeads
The slits lb theburner headsof yourcooktop
mustbekeptdean at a// timesforan even,
unhampered f lame.
_4m should clean tile smti_ce burners
routinely, especially after bad spilh)ve_,
which could clog these openings. Lift off
when cool.
To remove bm'ned-on tood, soak tile
bm'ner heads in a solution of mild
liquid detergent and hot water fi)r
20-30 minutes. For more stubborn stains,
use a toothbrush.
After Cleaning
Before putting tile bm'ner caps and
heads back, shake out excess water
and
then
(hw them
thoroughly b v setting in
}1%;111/10Vell _'or .'40 Illilltltes.
Replacement
Tile burner heads
and burner
bases are
labeled A, B and C to aid reassembE.
Replace tile burner heads on tile bases
matching file letters. ]?.el)lace the calls on
the heads. Make sm'e that the caps and
heads are replaced in the correct location.
There is one small (A), two medium (B)
and one laroe_ (C) head and cap.
Medium Small
Head Head
and Cap and Cap
& i
,,Q
QB Ae
eB cO
Frontof Cooktop
Q
I I
Medium Large
Head Head
and Cap and Cap
11