Step 2: Power Up The Appliance - Motorola SV-4250-P-1 - AirDefense Enterprise Appliance 4250 Quick Installation Manual

Appliance Quick Installation Guide
8
Which Ethernet port do I use for appliance network connectivity?
You can use any Ethernet port for appliance network connectivity. However, once you license the
appliance, you cannot switch Ethernet ports. The applied license is attached to the MAC address of
the Ethernet port.

3.2 Step 2: Power up the Appliance

For the Model 125x / Model 365x appliances, you must first press the
appliance to the On (1) position. (See previous rear view appliance graphics.) Then, press the
On
button (green LCD check button) for 2 seconds.
NOTE
NOTE
The Model 4250 appliance does not have a rear
When the power cord is connected for the first time, it takes some time
to charge all capacitors and it may take some time before the LCD switch
on front panel becomes responsive. Please wait 10-15 seconds when first
connecting the power cord, then press and hold the On button for
approximately 5 seconds if the appliance doesn't power up immediately.
Model 1250 / Model 3650 Appliance (Front View)
Model 1252 / Model 3652 Appliance (Front View)
On/Off
switch at the rear of the
On/Off
switch.
Power