Installation - VIORE LC26VH56 Operating Instructions Manual

INSTALLATION
+++++++,
@
_,/D,
i //'_
©
1 : Remote control sensor.
2: Indicator LED: GREEN @ POWER ON.
RED O STANDBY.
3: Key board
\
i!ii i
/
/
/
\ VIDEO
/o
\ L
/
\
r
1. SOURCE: Display tile input source menu.
2. MENU: Display main MENU.
3. Clt+/Clt-:In TV mode, press "CtI_ " or "CIt-" to
change the channel up and down.In MENU mode, press
"CIt_ " or "CtI-" to select items .Ii1 standby mode,
press "CHI" or"C|l-" to turn on theTV.
4. VOL+/VOL-:Adjust sound level.ha MENU mode,
press "VOL_ " or +'VOL-" to adjust the item that you
selected.
5. STANDBY : Press this button to turn the unit ON
from STANDBY mode. Press it again to turn the set
back to STANDBY.
6.V |DEO INPUT
7.AUDIO |NPUT-L
8.AUDIO INPUT-R
® ® ®® © ®
I.HDM1 Input
2.VGA Port (PC Input)
3.Colnponent Video (YPbPr) Input
4.Colnposite Video Input
5.Audio Input
6.PC Audio lnput
7.Antenna Socket
8.AC Power Socket
Note: 1.Composite video input and component video input share the audio input.
2.When "DV1 to HDM1 cable" is used, the audio output for DV1 needs to be connected to the
PC Audio Input (above 7).
=6=