Download Print this page

Craftsman 917.28001 Operator's Manual page 14

30" riding mower side discharge electric start
Hide thumbs Also See for 917.28001:

Advertisement

Available languages

Available languages

TO USE THROTTLE CONTROL
Always operate engine at full speed (fast).
• Operating engine at less than full speed
(fast)reduces engine's operating efficiency.
- Full speed (fast) offers the best mower
performance.
Throttle
\
TO MOVE FORWARD
AND BACKWARD
The direction
and speed of movement
is
controlled
by the motion control lever.
t.
Ensure the parking brake is applied.
2, Start riding mower with motion
control
lever in neutral (N) position.
3.
Release
parking brake,
4,
Slowly
move
motion
control
lever
to
desired
position,
\
\
\
Control
Lever
• The average lawn should be cut to ap-
proximately 2-1/2" during the cool season
and to over 3" during hot months.
For
healthier and better looking lawns, mow
often and after moderate growth,
• For best cutting performance, grass over
6" in heightshould be mowedtwice. Make
the first cut relatively high; the second to
desired height.
TO OPERATE MOWER
Your riding mower is equipped with an
operator presence sensing switch,
Any
attempt by the operator to leave the seat
with the engine running and the deck clutch
engaged will shut off the engine, You must
remain fully and centrally positioned in the
seat to prevent the engine from hesitating or
cutting off when operating your equipment
on rough, rolling terrain or hills.
1. Select desired height of cut,
2, Start mower blade by engaging deck
clutch lever.
TO STOP MOWER BLADE -
Disengage deck clutch lever.
DeckClutchLever
MowerHeight
"Disengaged"Position
AdjustmentHigh
Position
\
TO ADJUST MOWER CUTTING HEIGHT
The position of the mower height deck lift
lever determines the cutting height,
. Grasp lift lever,
• Press lift lever plunger with thumb and
move lever to desired position.
The cutting height range is approximately
1-I/2to 4". The heights are measured from
the ground to the blade tip with the engine
not running. These heights are approximate
and may vary depending upon soil condi-
tions, height of grass and types of grass
being mowed.
Mower
Deck Clutch Lever
Height Adjustment
"Engaged" Position
Low Position
_Jl, CAUTION: Do not operate the mower
without either the entire grass catcher, on
mowers so equipped, mulch cover, or the
deflector shield in place.
Deflector Shield
Mulch Cover
14

Advertisement

loading