Client Bridge Operating Mode; Logging I N; Status; Main - EnGenius EOC2611P User Manual

EnGenius EOC2611P
5 Client Bridge Operating Mode
5.1 Logging In
After logging in you will graphical user interface (GUI) of the device. The navigation drop‐down
menu on left is divided into four sections:
1. Status: Displays the overall status, connection status, and system log.
2. System: This menu includes the system properties, IP and Spanning Tree settings.
3. Wireless: This menu includes network, security and advanced settings.
4. Management: This menu includes the admin setup, SNMP, firmware upgrade, time settings,
diagnostics and save/restore backup.
5.2 Status
5.2.1 Main
Click on the Main link under the Status drop‐down menu. The status that is displayed
corresponds with the operating mode that is selected. Information such as device name,
firmware version, MAC address, country and current time are displayed in the 'System
Information' section. IP address, subnet mask, default gateway and DHCP client are displayed in
There are three options under the Status section of the
left menu: Main, Connection Status and System Log.
Each option is described in detail below.
Version 1.0
33