EnGenius EOC2611P User Manual page 11

Wireless outdoor access point / client bridge

Hide thumbs Also See for EOC2611P:

Table of Contents

EnGenius EOC2611P

2. Select Internet Protocol (TCP/IP) and then click on the Properties button. This will allow you to

configure the TCP/IP settings of your PC/Notebook.

3. Select Use the following IP Address radio button and then enter the IP address and subnet mask.

Ensure that the IP address and subnet mask are on the same subnet as the device.

For Example:

4. Click on the OK button to close this window, and once again to close LAN properties window.

PC IP address: 192.168.1.10

PC subnet mask: 255.255.255.0

Version 1.0

Table of Contents

Show Quick Links

Table of Contents