Ricoh Aficio MP C3000 Printer Reference page 18

Edge to Edge Print
Default Printer Language
Tray Switching
❖ Host Interface
I/O Buffer
I/O Timeout
❖ PCL Menu
Orientation
Form Lines
Font Source
Font Number
Point Size
Font Pitch
Symbol Set
Courier Font
Extend A4 Width
Append CR to LF
Resolution
10
Menu
Menu
Menu
Description
You can select whether or not to print on the
entire sheet.
You can set the default printer language if
the machinecannot find the printer language
automatically.
You can set to switch the paper tray.
Description
You can set the size of the I/OBuffer. Normal-
ly it is not necessary to change this setting.
You can set how many seconds the machine
should wait beforeending a print job. If data
from another port usually arrives in the mid-
dleof a print job, you should increase this
timeout period.
Description
You can set the page orientation.
You can set the number of lines per page.
You can set the storage location of the de-
fault font.
You can set the ID of the default font you
want to use.
You can set the point size you want to use for
the selectedfont.
You can set the number of characters per
inch for the selectedfont.
You can specify the set of print characters for
the selectedfont. The available options are as
follows:
You can select a courier font type.
You can extend the printing area width
when printing onA4 sheet with PCL.
When set to On, a carriage return will follow
each linefeed: CR=CR, LF=CR−LF, FF=CR−FF.
You can set the print resolution in dots per
inch.