Brother MFC 7345N - Laser Multifunction Center User Manual page 28

Node Name
You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will
be the name that is registered by the WINS server on your network. Brother recommends the name
"BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
(MFC-7440N and MFC-7840N) Go to d.
(MFC-7840W) Go to c.
c
(MFC-7840W only)
(For Wired) Press a or b to choose Wired.
(For Wireless) Press a orb to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose Node Name.
Press OK.
f
Press 1 to choose Change.
g
Enter the Node Name.
Press OK.
h
Press Stop/Exit.
WINS Config
This selection controls how the machine obtains the IP address of the WINS server.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
(MFC-7440N and MFC-7840N) Go to d.
(MFC-7840W) Go to c.
c
(MFC-7840W only)
(For Wired) Press a or b to choose Wired.
(For Wireless) Press a orb to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose WINS Config.
Press OK.
Control panel setup
3
3
3
21