Using License Install Utility
3.7
License Management Settings
The licenses of registered active token certificates can be managed.
Licenses can be issued, then functions on a device can be enabled (function
enabling) with a simple series of operations.
Depending on the device status and the network environment, it may be
possible to only issue a license or only enable functions.
Operations that can be performed with "License Management Settings"
- "Issuing a license and enabling device functions" on page 3-22
- "Issuing licenses" on page 3-29
- "Enabling device functions" on page 3-30
3.7.1
Issuing a license and enabling device functions
The information for the registered active token certificate is sent to the
license management server, and a license is issued.
After the license is issued, the license is registered with a device and the
functions are enabled.
General operation
- Select the operation. ("Step 1: Selecting the operation" on page 3-23)
- Issue the license. ("Step 2: Issuing a license" on page 3-24)
- Enable the device functions. ("Step 3: Enabling device functions" on
page 3-27)
Reminder
In order to issue a license and enable device functions, a connection
between the license management server and the device must be
available within the network.
License Install Utility
3
3-22