Emerson Wireless Gateway 1420 Quick Installation Manual page 4

1420 Wireless Gateway
c. Select Internet Protocol (TCP/IP), then click the Properties button
d. Select the Use the following IP address button and set the IP address to
192.168.1.12
e. Set the Subnet Mask to 255.255.255.0
f. Select OK for each of the settings windows that have opened.
3. Using the supplied crossover Ethernet cable, attach your PC/laptop to the 1420's
P1 Ethernet Receptacle (far right Ethernet receptacle).
PC/Laptop
Crossover Cable
WARNING
Do not connect to the P3 Power Over Ethernet (POE) port. This port supplies power
and could potentially damage the PC/laptop.
4
Quick Installation Guide
00825-0100-4420, Rev CA
P1 Ethernet
Receptacle
24 V DC 24 V DC
Power Input Power Input Modbus Modbus Not Used Not Used Not Used Not Used
+ - S S A B + - S S - +
Case Case
+ - S S - +
POE POE P2 P2 P1 P1 Not Used Not Used Not Used Not Used
(Covered) (Covered)
June 2007