For Print Server Mode With Netware 4.X Bindery Emulation - Konica Minolta bizhub C451 User Manual

Setting up network printing
7
In the NetWare Settings screen, touch [User Authentication Setting
(NDS)], and then specify settings for the following. After specifying the
settings, touch [Close].
– User Authentication Setting (NDS): Select [ON]. (Depending on the
network environment, select [OFF].)
8
In the NetWare Settings screen, touch [Close].
9
Restart this machine (turn the main power off, then on again).
10
Use the NetWare server console to display the print server screen, and
then check that the created printer is shown as "Waiting for Job" for
the connected printer (0).
Reminder
When turning the power off, then on again, wait at least 10 seconds be-
fore turning the power on again; otherwise, this machine may not function
properly.

For Print Server mode with NetWare 4.x bindery emulation

Note
Before using bindery emulation, check that bindery emulation is compat-
ible with the NetWare server.
1
Log on to NetWare as Bindery under the administrator authority from a
client computer.
2
Start up Pconsole.
C451
3
3-24