Ioh Voltage [Auto]; Ioh Pcie Voltage [Auto]; Ich Voltage [Auto]; Ich Pcie Voltage [Auto] - Asus P6T6WS Revolution - Motherboard - ATX User Manual

3.4.12

IOH Voltage [Auto]

Allows you to set the I/O Hub (IOH) voltage. The values range from 1.10V to 1.70V
with a 0.02V interval.
3.4.13

IOH PCIE Voltage [Auto]

Allows you to set the IOH PCIE voltage. The values range from 1.50V to 2.76V
with a 0.02V interval.
3.4.14

ICH Voltage [Auto]

Allows you to set the I/O Controller Hub (ICH) voltage. The values range from
1.10V to 1.40V with a 0.10V interval.
3.4.15

ICH PCIE Voltage [Auto]

Allows you to set the SB PCIE voltage. The values range from 1.50V to 1.80V with
a 0.10V interval.
The highest value of the ICH PCIE Voltage item is limited by the DRAM Bus
Voltage item.
3.4.16

DRAM Bus Voltage [Auto]

Allows you to set the DRAM voltage. The values range from 1.50V to 2.46V* with a
0.02V interval.
•
•
•
•
3-22
The value [2.46V] of the DRAM Bus Voltage item is supported only if
the OV_DRAM_BUS jumper is enabled, otherwise the maximum voltage
supported is [1.90V]. See CPU / DRAM Bus / QPI DRAM overvoltage
setting on page 2-21 for details.
According to Intel CPU spec, DIMMs with voltage requirement over 1.65V
may damage the CPU permanently. We recommend you install the DIMMs
with the voltage requirement below 1.65V.
The values of the CPU Voltage, CPU PLL Voltage, QPI/DRAM Core
Voltage, IOH Voltage, IOH PCIE Voltage, ICH Voltage, ICH PCIE
Voltage, and DRAM Bus Voltage items are labeled in different color,
indicating the risk levels of high voltage settings. Refer to the table on the
next page for details.
The system may need better cooling system to work stably under high
voltage settings.
Chapter 3: BIOS setup