Programming Macros - Radio Shack 5-In-One Learning Light-Up Remote Owner's Manual

3. Press . You can now use the remote for Chan-
9 9 6
nel Scan (see "Using Channel Scan" on Page 17).
4. Hold down until the red light blinks twice.
P

PROGRAMMING MACROS

Your remote has four macro keys (
, and
SPORTS NEWS
three channels per macro key for instant tuning of TV or
cable/satellite channels. For example, if your favorite
sports channel on your cable service is 061, you can
store it as an instant tune-in macro.
Follow these steps to program macros.
1. Hold down until the red light blinks twice.
P
2. Press to start the program.
9 9 5
3. Press the desired macro key (
, or
SPORTS NEWS
4. Press
CBL/SAT
device.
5. Press the numbers for the desired channel (for
example, for the sports channel in the previous
example press
0 6 1
Note: If your original remote control requires you to
press Enter or Select to send a command, press
Enter or Select after entering your three- or four-
digit channel number.
6. Hold down until the red light blinks twice to save
P
the setting.
If you want to add two more channels to the macro keys,
repeat Steps 1–6 twice, each time substituting another
channel number in step 5.
Note: You can only program three channels for each
macro key. Programming more than three channels will
overwrite one or more of your original channel settings.
12
MUSIC
) that you can use to store up to
MUSIC
).
or to select the appropriate
TV
or ).
0 0 6 1
Preparation
, ,
MOVIES
, ,
MOVIES