Asus P5Q SE2 User Manual page 35

10.. Optical.drive.audio.connector.(4-pin.CD)
These connectors allow you to receive stereo audio input from sound sources such as
a CD-ROM, TV tuner, or MPEG card.
P5Q SE2
P5Q SE2 Internal audio connector
11.. ATX.power.connectors.(24-pin.EATXPWR,.4-pin.EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
P5Q SE2
P5Q SE2 ATX power connectors
• For a fully configured system, we recommend that you use a power supply unit (PSU)
that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum
power of 400 W.
• Do not forget to connect the 4-pin EATX12V power plug; otherwise, the system will not
boot.
• Use of a PSU with a higher power output is recommended when configuring a system
with more power-consuming devices. The system may become unstable or may not boot
up if the power is inadequate.
• The ATX 12 V Specification 2.0-compliant (400W) PSU has been tested to support the
motherboard power requirements with the following configuration:
CPU: Intel
Memory: 512 MB DDR2 (x4)
Graphics card: ASUS EAX1900XT
Parallel ATA device: IDE hard disk drive
Serial ATA device: SATA hard disk drive (x2)
Optical drive: DVD-RW
ASUS P5Q SE2
ATX12V
® ®
Pentium Extreme 3.73GHz
CD
EATXPWR
PIN 1
+3 Volts
+3 Volts
-12 Volts
+3 Volts
GND
GND
PSPN#
+5 Volts
GND
GND
GND
+5 Volts
PIN 1
GND
GND
-5 Volts
Power OK
+5 Volts
+5V Staudby
+5 Volts
+12 Volts
+5 Volts
+12 Volts
GND
+3 Volts
1-25