Tm Tm; With Raid Functions - ASROCK Fatal1ty 990FX Professional Series User Manual

STEP 3: Use "RAID Installation Guide" to set RAID confi guration.
Before you start to confi gure RAID function, you need to check the RAID installation
guide in the Support CD for proper confi guration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
®
STEP 4: Install Windows
After step 1, 2, 3, you can start to install Windows
system. At the beginning of Windows
driver. When prompted, insert the SATA3 driver diskette containing the AMD RAID
driver. After reading the fl oppy disk, the driver will be presented. Select the driver to
install according to the OS you install.
2.16.2 Installing Windows
TM
Vista 64-bit With RAID Functions
If you want to install Windows
composed of 2 or more SATA3 HDDs with RAID functions, please follow below
steps.
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the "SATA Mode" option to [RAID]. (For SATA3_1 to SATA3_6 ports.)
Set the option "Marvell SATA3 Operation Mode" to [RAID]. (For eSATA3 ports.)
STEP 2: Use "RAID Installation Guide" to set RAID confi guration.
Before you start to confi gure RAID function, you need to check the RAID installation
guide in the Support CD for proper confi guration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Make a SATA3 Driver Diskette. (Please use USB fl oppy or fl oppy disk.)
Make a SATA3 driver diskette by following section 2.16.1 step 2 on page 46.
®
STEP 4: Install Windows
tem.
XP / XP 64-bit OS on your system.
®
®
setup, press F6 to install a third-party RAID
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista / Vista
Advanced screen
TM
7 / 7 64-bit / Vista / Vista
47
XP / XP 64-bit OS on your
TM
/
TM
64-bit on a RAID disk
Storage Confi guration.
TM
64-bit OS on your sys-