Table of Contents
Advertisement
10. SSI power connectors (24-pin ATXPWR1, 8-pin ATX12V2)
These connectors are for SSI power supply plugs. The power supply plugs
are designed to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
•
Use of an SSI 12 V Specification 2.0-compliant power supply unit
(PSU) that provides a minimum power of 450 W is recommended for
a fully-configured system.
•
By default, four ATX12V2 connector pins are covered to prevent
incorrent insertion of a 4-pin ATX +12V power plug. Remove this
cover when using a PSU with an 8-pin ATX +12V power plug.
•
Do not forget to connect the 4-pin or 8-pin ATX +12 V power plug;
otherwise, the system will not boot up.
•
Use of a PSU with a higher power output is recommended when
configuring a system with more power consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
•
You must install a PSU with a higher power rating if you intend to
install additional devices.
2
P5MT-C ATX Power Connectors
ASUS P5MT-C
ATXPWR1
24-pin Power Connector
1
ATX12V2
2-29
Advertisement
Table of Contents
