Table of Contents
Advertisement
Using Easy Configuration
To create a RAID set using the Easy Configuration option:
1.
From the utility main menu, highlight Configure, then press <Enter>.
2.
Use the arrow keys to select Easy Configuration, then press <Enter>.
3.
The ARRAY SELECTION MENU displays the available drives connected
to the SATA ports. Select the drives you want to include in the
RAID set, then press <SpaceBar>. When selected, the drive indicator
changes from READY to ONLIN A[X]-[Y], where X is the array number,
and Y is the drive number.
The information of the selected hard disk drive displays at the bottom of
the screen.
5-16
Chapter 5: Driver installation
Advertisement
Table of Contents
