Menu Items; Sub-Menu Items; Configuration Fields; Pop-Up Window - Asus P5LD2-X GBL User Manual

User manual
Hide thumbs Also See for P5LD2-X GBL:
Table of Contents

Advertisement

4.2.4

Menu items

The highlighted item on the menu bar
displays the specific items for that menu.
For example, selecting Main shows the Main
menu items.
The other items (Advanced, Power, Boot,
and Exit) on the menu bar have their
respective menu items.
4.2.5

Sub-menu items

A solid triangle before each item on any menu screen means that the iteam has a
sub-menu. To display the sub-menu, select the item and press <Enter>.
4.2.6

Configuration fields

These fields show the values for the menu items. If an item is user- configurable,
you can change the value of the field opposite the item. You cannot select an item
that is not user-configurable.
A configurable field is enclosed in brackets, and is highlighted when selected. To
change the value of a field, select it then press <Enter> to display a list of options.
Refer to section "4.2.7 Pop-up window".
4.2.7

Pop-up window

Select a menu item then press <Enter> to display a pop-up window with the
configuration options for that item.
4.2.8

Scroll bar

A scroll bar appears on the right side of a
menu screen when there are items that do
not fit on the screen. Press the
Up/Down arrow keys or <Page Up> /<Page
Down> keys to display the other items on
the screen.
4.2.9

General help

At the top right corner of the menu screen
is a brief description of the selected item.
ASUS P5LD2-X/GBL
BIOS SETUP UTILITY
Main
Advanced
Power
Boot
Tools
System Time
[19:34:30]
System Date
[Mon 11/19/2007]
Legacy Diskette A
[1.44M, 3.5 in]
Primary IDE Master
:[Not Detected]
Primary IDE Slave
:[Not Detected]
Third IDE Master
:[Not Detected]
Third IDE Slave
:[Not Detected]
Fourth IDE Master
:[Not Detected]
Fourth IDE Slave
:[Not Detected]
IDE Configuration
System Information
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
Main menu items
Advanced Chipset settings
WARNING: Setting wrong values in the sections below
may cause system to malfunction.
Configure DRAM Timing by SPD
[Enabled]
Memory Acceleration Mode
[Auto]
DRAM Idle Timer
[Auto]
DRAm Refresh Rate
[Auto]
Graphic Adapter Priority
[AGP/PCI]
Graphics Aperture Size
[ 64 MB]
Spread Spectrum
[Enabled]
ICH Delayed Transaction
[Enabled]
MPS Revision
[1.4]
Pop-up window
Exit
Use [ENTER], [TAB] or
[SHIFT-TAB] to select
a field.
Use [+] or [-] to
configure system time.
Select Screen
Select Item
+-
Change Field
Tab
Select Field
F1
General Help
F10
Save and Exit
ESC
Exit
Select Screen
Select Item
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Scroll bar
4-13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P5ld2-x/gbl

Table of Contents