Important notes on Serial ATA
•
•
Serial ATA hard disk drive connection
Connector
SATA1/SATA2
SATA3/SATA4
4.
Optical drive audio connector (4-pin CD)
This connector is for the 4-pin audio cable that connects to the audio
connector at the back of the optical drive.
P5LD2-X/GBL
P5LD2-X/GBL Internal Audio Connector
2-26
You must install Windows
Service Pack 1 before using Serial ATA hard disk drives.
When using the connectors in Standard IDE mode, connect the primary
(boot) hard disk drive to the SATA1 or SATA2 connector. Refer to the table
below for the recommended SATA hard disk drive connections.
Color
Red
Black
2000 Service Pack 4 or the Windows
®
Setting
Master
Slave
CD
(black)
Chapter 2: Hardware information
XP
®
Use
Boot disk
Data disk