Boot Screen - ASROCK 970 Pro2 User Manual

3.6 Boot Screen

In this section, it will display the available devices on your system for you to config-
ure the boot settings and the boot priority.
Main OC Tweaker
Boot Settings
Boot Settings Configuration
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Hard Disk Drives
Removable Drives
CD/DVD Drives
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
3.6.1 Boot Settings Configuration
Boot Settings Configuration
Full Screen Logo
AddOn ROM Display
Boot From Onboard LAN
Bootup Num-Lock
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Full Screen Logo
Use this item to enable or disable OEM Logo. The default value is [Enabled].
AddOn ROM Display
Use this option to adjust AddOn ROM Display. If you enable the option "Full
Screen Logo" but you want to see the AddOn ROM information when the
system boots, please select [Enabled]. Configuration options: [Enabled]
and [Disabled]. The default value is [Enabled].
Boot From Onboard LAN
Use this item to enable or disable the Boot From Onboard LAN feature.
Bootup Num-Lock
If this item is set to [On], it will automatically activate the Numeric Lock
function after boot-up.
BIOS SETUP UTILITY
Advanced H/W Monitor
[1st Floppy Device]
[HDD: PM - HDS722580VL]
[CD / DVD: 3S - CD - ROM C]
[USB]
BIOS SETUP UTILITY
Boot
[Enabled]
[Enabled]
[Disabled]
[On]
49
Boot Security Exit
Configure Settings
during System Boot.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Disabled: Displays
normal POST messages.
Enabled: Displays OEM
Logo instead of POST
messages.
Select Screen
Select Item
+ - Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit