Table of Contents
Advertisement
Getting started
1
Connect the power cord to a standard AC outlet.
NOTE: If some digits appear in the corner of the
screen, press the POWER button without unplugging
the power cord.
2
Press the POWER button to turn on the TV/DVD.
3
Press the SELECT button on the remote control until
channel number or "TV" appears on the screen.
Then press the TV button.
LANGUAGE SELECTION
If you want to change the language of the on-screen
menu, follow the procedure below.
1
Press the SETUP button so that the
setup display appears on the TV
screen.
2
Press the Arrow K or L button to
point to "LANGUAGE".
3
Select "ENGLISH", "ESPAÑOL" = Spanish or
"FRANÇAIS" = French by using the Arrow B or s
button.
4
Press the SETUP button to exit the setup.
NOTE: An on-screen display language must be
selected each for the TV mode and DVD mode.
CHANNEL PRESETTING
To preset a channel or to change a preset channel,
follow the procedure below.
1
Press the SETUP button so that the
setup display appears on the TV
screen.
SET UP FOR USE
2
Press the Arrow K or L button to
point to "CHANNEL SET". Then,
press the Arrow B button.
3
Press the Arrow K or L button to
point to "AUTO MEMO". Then,
press the Arrow B button.
The tuner scans and memorizes all
active channels in your area.
•
The TV distinguishes between standard TV chan-
nels and cable channels.
•
When AUTO MEMO action is completed, the low-
est memorized channel reappears on the screen.
•
When you press the Arrow K or L button after
selecting AUTO MEMO, the tuner will stop at the
memorized channels only.
•
The TV/VCR may memorize TV channels as
CATV channels if reception conditions are poor. If
CHANNEL SET
this happens, try the AUTO MEMO action again
LANGUAGE [ENGLISH]
ESPAÑOL
when reception conditions are better.
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
[ADD/DELETE FUNCTION]
1)Press the SETUP button so that the setup display
appears on the TV screen.
CHANNEL SET
LANGUAGE [ENGLISH]
2)Press the Arrow K or L button
ESPAÑOL
to point to "CHANNEL SET".
FRANÇAIS
V-CHIP SET UP
Then, press the Arrow B button.
CAPTION [OFF]
3)Press the Arrow K or L button
to point to "ADD/DELETE".
Then press the Arrow B button.
4)Use the Arrow K or L button to
select the channel you wish to
put into memory or to erase from memory.
NOTE: The display will return to the screen in
about 10 seconds. Perform "ADD/DELETE" func-
tion while this display appears on the screen.
•
Press the Arrow B or s button to light up the
channel number in LIGHT BLUE if you wish to
add the channel into memory.
•
Press the Arrow B or s button to light up the
channel number in LIGHT RED if you wish to
erase the channel from memory.
5)Press the SETUP button to exit the setup.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
– 15 –
– 15 –
TV SECTION
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
ADD/DELETE
AUTO MEMO
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
ADD/DELETE
AUTO MEMO
EN
0C28
Hide quick links:
Advertisement
Table of Contents
