ASROCK 939S56-M Manual page 6

Raid utility for windows guide

Hide thumbs Also See for 939S56-M:

4. <Available Disks>:

This pane will list out all the disks that can be used to create a RAID set

currently. It will show some disk information (ex. Location, serial numbers,

the ability of boot and the status of recovering).

5. <Selected Disks>:

This pane will list out all the disks that have been selected to create a

RAID set. User can highlight the specific disk that we wants in the

<Available Disks> pane and click the downward arrow icon or double

click the marked disk to select that disk into the <Selected Disks> pane. In

the same way, user can click the upward arrow icon or double click the

marked disk in the <Selected Disks> to get back the disk that we might

select wrong to the <Available Disks> pane.

6. <Information>:

This pane will show the information about creating a RAID set after

clicking the Create button. The information may be "Please select the

<Raid Type> first!", "Please select the <Mode Type> first!", "Please select

the <Block Size> first!", "Please select the disk you want first!", "Mirror

supports TWO DISKS only.", "Raid Created successful! Reboot please!!"

or "Raid Creation failed!".

Table of Contents