ASROCK 939S56-M Manual page 14

Raid utility for windows guide

Hide thumbs Also See for 939S56-M:

4. When the RAID1 array's configuration is finished, click the Create

button. Then a "Create Mirror RaidSet" dialog will pop up.

Source:

Target:

Create Only:

Create and

Duplicate:

OK:

Cancel:

<Disk Copy Remaining Sector>:

Show the remaining splitting data.

5. Next, you may click Cancel button to leave, or click OK button to

continue after the operation being selected. The warning messages

will pop up according to the operation you selected, and the mes-

sage is similar to JBOD array creation.

The first selected disk.

The second selected disk.

Select this option will destroy all data on all

the selected disks and create a clean mirror

array without any data on it.

Duplicate operation will reserve data on the

source disk and copy them onto the target

disk.

Start the operation.

Cancel the operation.

Table of Contents