Setting And Starting A Programme - AEG L 75478 FL User Manual

5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent dis-
penser. Make sure that the flap
does not cause a blockage when
you close the drawer.

SETTING AND STARTING A PROGRAMME

1. Turn the programme knob. The re-
lated programme indicator comes
on.
2. The indicator of button
with red colour.
3. The display shows the default tem-
perature and spin speed. To change
the temperature and/or the spin
speed, press the related buttons.
4. Set the available functions. The indi-
cator of the set function comes on
or the display shows the related
symbol.
5. Press button
gramme. The indicator of button
is on.
INTERRUPT A PROGRAMME
1. Press button
flashes.
2. Press button
programme continues.
4 flashes
4 to start the pro-
. The indicator
4
again. The washing
4
4. To use liquid detergent, turn the
flap down.
With the flap in the position
DOWN:
– Do not use gelatinous or thick
liquid detergents.
– Do not put more liquid deter-
gent than the limit showed in
the flap.
– Do not set the prewash
phase.
– Do not set the delay start
function.
CANCEL A PROGRAMME
1. Press button
gramme and to deactivate the ap-
pliance.
2. Press button
the appliance. Now, you can set a
new washing programme.
The appliance does not drain
the water.
CHANGE A FUNCTION
You can change only some functions
before they operate.
4
1. Press button
flashes.
2. Change the function set.
SET THE DELAY START
1. Press button
until the display shows the number
of minutes or hours. The related
symbols comes on.
ENGLISH
to cancel the pro-
1
1 again to activate
. The indicator
4
again and again
5
15