Table of Contents
Advertisement
Installation
Unpacking
All transit bolts and packing must be removed before using the appli-
ance.
Using the supplied spanner, unscrew and
remove the rear right-hand bolt and lay the
machine on its back, taking care not to
squash the hoses. This can be avoided by
placing one of the corner packing pieces
between the machine and the floor.
Remove the poly-
styrene base and
take off the bot-
tom panel by
unscrewing the
central screw.
Carefully slide out
the right poly-
thene bag.
Repeat the opera-
tion for the left
and central poly-
thene bags.
Re-fit the bottom
panel using the 4
screws supplied
with the door
hinges (in the plas-
tic bag) and the previously removed screw.
46
Hide quick links:
Advertisement
Table of Contents
