Table of Contents
Advertisement
USE
BEFORE USE
Position and clean the cabinet as
explained in the section "Installation".
Control Panel
A B C
A. Freezer power switch
Switches the freezer on and off.
Green indicator lamp
Lights when the freezer is operating.
B. Temperature display
Shows the highest temperature inside
the freezer.
C. Temperature adjustment
button/thermostat
Used to set the temperature in the
freezer.
To start the freezer and set the correct
temperature
Switching on:
Switch on the freezer by pressing the
power switch.
The alarm sounds if the temperature
inside the freezer reaches room
temperature. Turn off the alarm by
pressing the switch-off button.
18
--
71
-- 18
ACTION FREEZE
C
D
ACTION FREEZE
Before inserting the power plug into the
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 4 hours. Otherwise the
compressor may sustain damage. This
time will allow the oil sufficient time to
return to the compressor.
E
D. FAST FREEZE button
Used to switch the Fast Freeze feature
on and off.
Yellow indicator lamp
Lights when Fast Freeze is operating.
E. Alarm shut-off button
Used to turn the audible alarm off.
Red warning lamp
Flashes when one of the alarms in the
cabinet has been triggered.
20
--
Setting the temperature
Press the buttons until the desired
temperature blinks on the temperature
display. (The temperature can be set
between -15°C and -24°C.)
"+" increases the temperature.
"-" decreases the temperature.
ACTION FREEZE
Advertisement
Table of Contents
